F26 DOOR SWITCH ERROR If the door has not been opened for 3 consecutive cycles or the door switch is open while the door is locked for more than 5 seconds. F07 Motor control unit error The Central Control Unit has detected a short in the motor control unit. Verify pressure switch operation. 7. Sign in to report inappropriate content. http://nbxcorp.com/error-code/whirlpool-range-error-code-e2-f1.html
Check wire harness connections to pressure switch, drain pump, and Central Control Unit (CCU). This may signify problems with the drive motor, thermal protector or motor controller. NOTE: After 4 minutes the “Sud” error will be displayed, then 4 minutes later the F02 error code will be displayed. This feature is not available right now.
You May Also Like Whirlpool Range Error Codes Whirlpool Stove F5 Error. The washer does not flash "PF" when it is first plugged in. It should be just standard 120 volts to engage the solenoid, no harm to try. Whirlpool Top Load Washing Machine Error Codes Check dispenser motor for powered rotations.
Check drain pump. 7. Check the drain hose and make sure it is not plugged or kinked. 2. Replace failed component.
Door switch open while door is locked. 1.
Plug in washer or reconnect power. 4. Whirlpool Washer F5 Error Code Loading... F2 Oven temperature is too high 1. AppliancePartsPros 24,563 views 3:34 What to do When Your Lid Won't Unlock | Whirlpool Appliance Repair and Maintenance Self Help Videos - Duration: 0:55.
Check the inlet valve for proper shut off. 7. http://www.shopyourway.com/questions/1000352 Household power supply is too low. 2. Whirlpool Oven Error Codes Check the water temperature sensor and connection to it. 3. Whirlpool Range Error Code F9e0 Check/clean drain pump filter of foreign objects. 5.
Replace Central Control Unit if drum is not moving. this content This may signify problems with the drive motor, thermal protector or motor controller. Try unplugging unit for two minutes to see if that fixes error. I vacuumed and cleaned and the error code went away. Whirlpool Top Load Washer Error Codes
The pump is cycled in drain mode for 30 seconds on, 30 seconds off until the overfill switch resets or power is discontinued to the unit. It should be approx. 115 Ω. 4. Check all hoses for possible leaks. 5. weblink Working...
F5 - E6 Door is open, but latch is locked F5 - E7 Self clean latch will not unlock F6 - E0 Return line not connected If switch pulse return line Whirlpool Microwave Error Codes Check for stuck lock switch. F24 WATER TEMPERATURE SENSOR ERROR If the water temperature sensor (NTC) value is out of range (23°F to 217°F[-5°C to 103°C]) during the water-heating step of the WASH cycle.
Replace also the CCU. Make sure all grounding switches are engaged. 3. Verify CCU operation by running a Diagnostic Test or any cycle. Whirlpool Accubake Oven Error Codes Exchange the complete valve block if the steamer valve has not a resistance of approx. 812 Ω between both contacts. 6.
F99 NOT SUPPORTED User selected on the UI the unsuppor ted Cycle on the CCU. Check probe. Find Parts ^ top Appliance Repair Appliance Repair Dishwasher Repair Garbage Disposer Repair Dryer Repair Freezer Repair Microwave Repair Range / Oven Repair Range Hood Repair Refrigerator Repair Trash Compactor Repair http://nbxcorp.com/error-code/whirlpool-range-error-codes-e2-f1.html Check the MCU by looking for operations of the drive motor. 7.
F2 - E1 Keypad cable unplugged F2 - E5 Cancel key drive line open F2 - E6 Cancel key drive line open F3 - E0 Oven temperature sensor (RTD) opened (upper Check door switch/lock unit for foreign objects. 2. F07 Motor control unit error The Central Control Unit has detected a short in the motor control unit. ft.
Jake Appliance Repair School 1987-1988 Star Appliance Tech. 2 yrs. 1988-1990 Wards Appliance Tech. 11 yrs. 1990-2001 Sears Appliance Tech. 4 yrs. 2001-Oct. 2005 Jake's Appliance Repair Nov. 2005-present Look-Up & Check wire harness connections to the drain pump, pressure switch, and Central Control Unit (CCU). 4. Rub the rag along the latch area until it becomes clean. E2 F3 Error on My Whirlpool Stove Whirlpool Stove F5 Error.
Replace failed component. RepairClinic.com 7,542 views 8:21 Whirlpool duet sport washing machine not draining, codes F05 or F21 showing up - Duration: 10:33. Sign in 1 Loading... F1 - Control Board Failure - Replace control board (clock).
© Copyright 2017 nbxcorp.com. All rights reserved.