(Solved) Windows 7 Disk Error Event Id 11 Tutorial


Home > Event Id > Windows 7 Disk Error Event Id 11

Windows 7 Disk Error Event Id 11

Contents

The hardware problems can be associated with poor cabling, incorrect termination or transfer rate settings, lazy or slow device responses to relinquish the SCSI bus, a faulty device, or, in very Heat itself is most likely caused by something else, such as faulty fan on the computer case (pretty cheap to replace). One thing to note however, is that "DR" is being incremented as you insert new (e.g. There is no authoritative list of USB drives compatible with different versions of Windows Server; however, the Windows Small Business Server (SBS) team has compiled a list of USB drives and http://nbxcorp.com/event-id/windows-error-wmi-event-id-10.html

Recommend Us Quick Tip Connect to EventID.Net directly from the Microsoft Event Viewer!Instructions Customer services Contact usSupportTerms of Use Help & FAQ Sales FAQEventID.Net FAQ Advertise with us Articles Managing logsRecommended But I don't think ignoring these errors is a good strategy.After reading some MS forum I tried this: Set service "Windows Driver Foundation User mode Driver Framework" to automatic (wudfsvc). Very handy, and then you have up to 28 days to put your real key in and activate. Once again, thank you very much!!! dig this

Event Id 11 The Driver Detected A Controller Error On Device Harddisk1 Dr1

My jumper setting was "Force Dev1 present" and I changed it to "Master". I am pretty confident that this is the right diagnosis, as we went through a lot of trial and error investigative work, in a space of few weeks, after it started recollect the elephant? The error description reads as follows: The driver detected a controller error on Device\Harddisk#\DR#.

Superscripts appear in various weird places in fractions Is there a technical term for this simple method of smoothing out a signal? \dot not centred above \symbf of a capital letter I have just switched the SATA cable to Port1 as all errors seem to happen on Port0. Any CF cards are mounted as IDE devices, even though they are really connected via USB. Event Id 11 Kerberos-key-distribution-center Also, once you figure out hard-drive health, you can use same utilities to save whatever data is on there.

Nothing wrong...I replugged the DriveStation to the server, restarted the "Block Level Backup Engine Service".Anything else I could try? « Last Edit: December 23, 2013, 02:49:33 PM by fdlwebmaster » Logged Still, going forward this should improve things, I'll report back on that. At seemingly random times, my computer would lock itself solid. Clicking Here Click Properties.

I change it so each drive was on its own IDE physical connection, and put my CDROM on the second channel as slave. Event Id 11 Wininit I have seen this KB referenced several times, quite often with requests for more recent information. If it still happens, the bad news is that this is likely a disk controller error, which is especially problematic since nowadays disk controllers are built into the Motherboard. After that I was able to write to cd, dvd, and able to delete rewritable cd. ( I left HD on the same port!, but hard disk can also cause this

  1. It finally turns out that the culprit is the USB CompactFlash reader attached to my machine.
  2. If they are SATA, try changing from AHCI to IDE emulation and see how it goes. –ta.speot.is May 14 '10 at 12:32 How dangerous is changing AHCI to and
  3. Robert Shell Jul 21, 2012 @ 17:45:20 Is there a test for the hard drive controller?
  4. The reason is that if your Hard-Drive is not turning back On, it is also a sign of impending HD death, or perhaps a sign of faulty motherboard mechanism.
  5. Adi R Mar 30, 2012 @ 12:47:35 Port number changes just from the way your Hard-drive(s) is connected to the motherboard.
  6. The D: drive was not accessible.
  7. Thanks...
  8. Even with 5 minutes per server (to check the logs and other parameters), it may take an hour to make sure that everything is ok and no "red lights" are blinking
  9. So the disk numbers shown in the Disk Management console (Disk 1, Disk 2, Disk 3, etc) correspond to the \Device\Harddisk# in those Event Log errors.
  10. I was under the impression that "DR" stands for "disk removable", but I honestly wasn't able to find any references to that so I could be wrong.

Event Id 11 Disk The Driver Detected A Controller Error

Disabling the card reader through Device Manager seems to have stopped the intermittent error messages. https://community.spiceworks.com/topic/304581-driver-detected-a-controller-error-which-hdd-is-device-harddisk2-dr2 DigDeep Dec 28, 2012 @ 14:20:21 I had this problem too. Event Id 11 The Driver Detected A Controller Error On Device Harddisk1 Dr1 like C:, D:, etc and which is the harddrives and dvd/cd, floppy, etc. Event Id 11 Windows 7 need to really see the setup to make things easier.

I have HP RAID management software but it didn't really help either since I have so many other hard drives (USB, iSCSI) that are not on the internal RAID. check my blog more stack exchange communities company blog Stack Exchange Inbox Reputation and Badges sign up log in tour help Tour Start here for a quick overview of the site Help Center Detailed I just had it start happening on our Laptop also, but seems to only occur few times a week at most. Sure enough we received the error "The driver detected a controller error on \Device\Ide\IdePort0", after a close review we also got one for each HD in the machine (there are 5), Event Id 11 Atapi

Still, as mentioned earlier - for most folks motherboard is fine and the culprit will be hard-drive that is getting old and about to fail. more stack exchange communities company blog Stack Exchange Inbox Reputation and Badges sign up log in tour help Tour Start here for a quick overview of the site Help Center Detailed Now that I feel it is fully resolved, I thought Iā€™d share my conclusion (and the process) ā€“ hopefully it will help few others out there who are struggling with this. http://nbxcorp.com/event-id/windows-error-event-id-26.html hard-drive windows-server-2008-r2 controller share|improve this question edited May 14 '10 at 9:22 quack quixote 31.4k1068114 asked May 14 '10 at 8:44 Guy Thomas 2,39282644 add a comment| 1 Answer 1 active

So, if you insert a memory stick for the first time, it could be logged as Harddisk1\DR1 but when you eject it and put it back in, it will be Harddisk1\DR2 Event Id 11 Custom Dynamic Link Libraries If you don't feel comfortable opening computer case and figuring out what is causing the heat, I would recommend taking it to technician to address the heat issue first. Join them; it only takes a minute: Sign up Here's how it works: Anybody can ask a question Anybody can answer The best answers are voted up and rise to the

How do I yank and cycle backward through earlier killed text?

The system had two hard-drives, and the older hard-drive was seemingly working just fine, even with the same SATA cable and connected to the same slot on the Motherboard. Keeping an eye on these servers is a tedious, time-consuming process. What should I do? Event Id 11 Rpc Forum SolvedBitlocker error when inserting any USB device, error event ID 24620 Forum kernel-power event id 41 error AFTER clean install Forum SolvedDisk Event ID 11 winxp SP3 Forum my pc

add a comment| 2 Answers 2 active oldest votes up vote 0 down vote How to Distinguish a Physical Disk Device from an Event Message https://support.microsoft.com/kb/159865 share|improve this answer answered Mar This may also be helpful. Disable sleep mode in power management? (this might not be very good for the drive to spin all the time). have a peek at these guys I thought this was due to one of the HD controllers playing up.

Not the same as the bios numbers. x 75 Private comment: Subscribers only. I have never heard of such a thing, but perhaps it does exist out there somewhere. As an aside ā€“ DDR3 memory is Ridiculously Cheap.

Will this help? x 309 W4tch3r ‹•æ•› I am getting this error using multiple drives in a Shintaro USB3 drive caddy. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure